PVDF Membrane Microporous Pleated Filter Cartridge Microelectronics Filter 0.22um
General Description
The PVDF Pleated filter cartridge is constructed of imported natural hydrophobic Polyvinylenedifluoride (PVDF) membrane media and non-woven support materials. Adaptors are thermally welded with media without using any glue on it, so there is no possibilities to cause pollution.
Applications:
1. High purity gas in the electronics industry;
2. Clean gas for aseptic packaging;
3. Steam filtration;
4. Oxidizing liquid and gas sterilization filtration;
5. Petroleum industry;
Features
1. Natural hydrophobic product suitable for gas filtration;
2. The modified membrane is hydrophilic and suitable for liquid filtration;
3. Wide applicability, PH range 1-13;
4. With high temperature and oxidation resistance;
5. Small differential pressure, large flow and long service life;
6. Each filter is rinsed with high purity water before leaving the factory.
Dimensions
| Outer diameter |
2.7" (69mm) |
| Length |
10", 20", 30", 40" |
Material of Construction
| Model |
Membrane Pleated Filter |
| Filter Medium |
PVDF |
| Support/Drainage |
Polypropylene |
| Center core/Outer Cage/End Caps |
Polypropylene |
| Seals Material |
NBR, Silicone, EPDM, Viton |
Filter Performance
| Micron |
0.1um, 0.22um, 0.45um, 0.65um |
| Length |
10", 20" |
| Interception rate |
100%, 107CFΜ/cm² |
| Max. operating temperature |
80℃ |
| Max. operating differential pressure |
0.42Mpa at 25℃ |
|
Max. operating differential pressure
(Reverse direction)
|
0.21Mpa at 25℃ |
| Applicable PH |
1-14 |
Product Tags:
|
|
0.22um Microelectronics Filter PVDF Membrane Microporous Pleated Filter Cartridge Images
|
